Eric Fielding

  • Registered on: 02/21/2013
  • Last connection: 09/14/2020

Activity

Reported issues: 2

09/27/2020

10:16 pm Earthdef::ISCEForum ISCE Forum: RE: "Bad internal unit" error with dem.py
I found a way to get a newer set of compilers for use on CentOS 7. It turns out that our system manager has already i...

09/14/2020

01:34 pm Earthdef::ISCEForum ISCE Forum: RE: "Bad internal unit" error with dem.py
Hi Heresh,
I was trying your suggestion of installing an older GCC under conda to get the libgfortran.3 installed ...

08/30/2020

10:37 am Earthdef::ISCEForum ISCE Forum: RE: isce2 on conda-forge
Hi Yahui,
The range split-spectrum method for ionospheric corrections is not in v2.2, only in v2.3 and v2.4. The w...

08/29/2020

10:59 am Earthdef::ISCEForum ISCE Forum: RE: isce2 on conda-forge
Hi Yahui,
Do you specifically need ISCE v2.2.0? That version is more than two years old and not maintained. It mig...

08/12/2020

11:43 am Earthdef::ISCEForum ISCE Forum: RE: ISCE installation problem
I had a similar problem with installing the ISCE v2.4.0 and opened an issue on GitHub: https://github.com/isce-framew...

07/28/2020

09:13 pm Earthdef::ISCEForum ISCE Forum: RE: rtcApp.py in ISCE v2.3.3
Helen,
What is the map projection (CRS) of your DEM? It should be equally spaced in latitude and longitude (CRS "E...

07/27/2020

10:05 pm Earthdef::ISCEForum ISCE Forum: RE: rtcApp.py in ISCE v2.3.3
Hi Helen,
In QGIS 3.10 (I don't have QGIS 2.x anymore, but it was similar), I can right-click on a layer and chose...
08:10 pm Earthdef::ISCEForum ISCE Forum: RE: ENVISAT_SLC data more than 1 frame
Mike,
The other advantage of getting the raw Envisat data is that you can process it with chirp extension and get ...
01:25 pm Earthdef::ISCEForum ISCE Forum: RE: Problem with converting GMTSAR output 'grd' to ISCE output data format
Hi Jiang,
What are you planning to do with your GMTSAR interferograms after converting them to ISCE format? If you...
01:16 pm Earthdef::ISCEForum ISCE Forum: RE: SentinelWrapper (run_1_topo_master) stuck at Actual DEM bounds
Hi Lincoln,
I don't see an obvious reason why your v2.3.3 processing failed. Maybe it ran out of disk space or mac...

Also available in: Atom