Piyush Agram

  • Email:
  • Registered on: 09/17/2012
  • Last connection: 06/07/2020

Projects

Activity

Reported issues: 0

11/16/2020

10:51 am Earthdef::ISCEForum ISCE Forum: RE: TopsApp Notebook
Conda is up to date. This is very likely due to not updating conda for a while on the user side or pinning some other...

11/03/2020

07:34 am Earthdef::ISCEForum ISCE Forum: RE: External DEM Lidar or EU-DEM in ISCE
You can look at unavco training materials from 2019 and 2020 on examples on how to modify DEMs and bring in your own ...

11/02/2020

01:48 pm Earthdef::ISCEForum ISCE Forum: RE: External DEM Lidar or EU-DEM in ISCE
The short answer is the effort needed to do it is probably not worth it. EU-DEM uses a weird vertical datum for which...

09/13/2020

12:00 pm Earthdef::ISCEForum ISCE Forum: RE: Problem about install isce-2.2.0
Sorry. isce-2.2.0 is ancient and I dont think you will find volunteers to support this.
Please note that people pro...

07/21/2020

11:09 am Earthdef::ISCEForum ISCE Forum: RE: Cosmo CSK error Stripmap AttributeError: 'NoneType' object has no attribute 'lower'
The error is self explanatory. For some reason there is a hardcoded check for UAVSAR, give the setup line a sensor ar...

07/15/2020

09:55 pm Earthdef::ISCEForum ISCE Forum: RE: rtcApp.py in ISCE v2.3.3
ISCE uses a flat binary file for DEM. Write out your DEM as an ENVI file using gdal_translate. Then run gdal2isce_xml...

07/10/2020

09:49 am Earthdef::ISCEForum ISCE Forum: RE: rtcApp.py in ISCE v2.3.3
The xml file still looks the same and the error says "output" was not provided.

07/09/2020

06:35 pm Earthdef::ISCEForum ISCE Forum: RE: rtcApp.py in ISCE v2.3.3
Looks like you have two entries for orbits instead of one for output.
That line change shouldnt matter.

07/01/2020

08:26 am Earthdef::ISCEForum ISCE Forum: RE: stackSentinel.py processing error
I would recommend using full paths for all folders when setting up the processing. This will let you run the commands...

06/23/2020

09:10 am Earthdef::ISCEForum ISCE Forum: RE: rtcApp.py in ISCE v2.3.3
Centos unfortunately tends to be atleast 2 years behind. If you use Centos8, it will be lot better than Centos7 which...

Also available in: Atom